How to Change the Oil on a Cub Cadet Riding Lawn Mower

How to Change the Oil on a Cub Cadet Riding Lawn Mower

Regular oil changes are essential to keeping your mower’s engine in working condition and will maximize its lifespan. To keep your Cub Cadet running smoothly and efficiently, follow these steps to change the oil in your machine.

Before performing any maintenance on your , refer to your owner’s manual for recommended maintenance and safety information. Maintenance instructions vary by model, so depending on your riding lawn mower model our instructions may vary slightly. Check your owner’s manual to get instructions specific to your model, including information about the recommended oil type.

Begin by parking your mower on a flat, level surface. Turn the engine off and allow it to cool, remove the ignition key, disconnect the spark plug ignition wire to prevent accidental starting, and engage the parking brake.

Place a piece of cardboard under your mower to catch oil drips and use an oil basin to catch the old oil when it is drained from the engine.

Remove the dip stick from the oil fill tube and drain the oil and allow the engine oil to completely drain. If your Cub Cadet has an oil filter, replace it with a new one. Use an oil filter wrench to unthread the oil filter from the engine. Use a rag to clean the area around the engine of any spilled oil.

Replace the oil filter and add a little oil to the seal of the new oil filter to help with the install. Use your hand to thread the new oil filter onto the engine. Do not overtighten. Use your oil filter wrench to snug the fit but do not overtighten.

Add new oil to your Cub Cadet riding lawn mower. Use the oil recommended by the engine manufacturer and fill to the recommended levels. Replace the dip stick and check the engine oil levels.

Check the oil level with the dip stick. Depending on where it reads, you may need to add more oil. When checking the oil with the dip stick, place the dip stick into the oil and push it all the way down. Remove the dip stick, clean it with your rag, and place it in the oil one more time to check the oil level.

Reconnect the spark plug wire and your maintenance is done.

Use our illustrated parts diagrams to locate any replacement parts you may need for maintenance.

Free Parts Search      Free Shipping

How to Change the Air Filter on a Cub Cadet Riding Lawn Mower

How to Change the Air Filter on a Cub Cadet Riding Lawn Mower

To ensure that your engine runs smoothly this season and the next, regularly clean or replace the air filter on your Cub Cadet riding lawn mower. It’s recommended that your air filter be cleaned or replaced every 50 hours of use. In dry, dusty conditions this should be done more frequently.

Before performing any maintenance on your Cub Cadet riding lawn mower, refer to your owner’s manual for recommended maintenance and safety information. Maintenance instructions vary by model, so depending on your riding lawn mower model our instructions may vary slightly. Check your owner’s manual to get instructions specific to your model.

Begin by parking your mower on a flat, level surface. Turn the engine off and allow it to cool, remove the ignition key, disconnect the spark plug ignition wire to prevent accidental starting, and engage the parking brake.

Use a rag to clean the engine of dirt and debris. Remove the air filter cover and the air filter.

Check and clean the air filter. Remove the foam pre filter. Use a flashlight to check for any damage to the air filter. Clean the paper element filter by tapping gently to remove dust. If the element is very dirty or damaged, replace it with a new one.

Wash the foam pre filter. Use mild detergent and warm water to wash the foam pre filter and allow it to dry completely. Keep in mind – never use gasoline or low flash-point solvents for cleaning the air filter elements.

Place the dry pre filter back onto the air filter and reinstall the air filter. Secure the air filter cover and lock handles.

Reconnect the spark plug ignition wires on your Cub Cadet riding lawn mower.

Use our illustrated parts diagrams to locate any replacement parts you may need for maintenance.

Free Parts Search      Free Shipping

How to Change the Oil on a Cub Cadet Ultima

How to Change the Oil on a Cub Cadet Ultima

Regular oil changes are essential to keeping your Cub Cadet Ultima’s engine in working condition. Regular oil changes also maximize the lifespan of your mower and keep your Cub Cadet running smoothly and efficiently.

Before performing any maintenance on your Cub Cadet Ultima, refer to your owner’s manual for recommended maintenance and safety information. Maintenance instructions vary by model, so depending on your model our instructions may vary slightly. Check your owner’s manual to get instructions specific to your model, including information about the recommended oil type.

To change the oil on your Cub Cadet Ultima, begin by parking your mower on a flat, level surface. Turn the engine off and allow it to cool, remove the ignition key, disconnect the spark plug ignition wire to prevent accidental starting, and engage the parking brake.

It may be helpful to place a piece of cardboard under your mower to catch oil drips. Use an oil basin to catch the old oil when it is drained from the engine. Remove the dip stick and drain the oil. Use a ¾-inch and a ½-inch wrench to unthread the stopper plug from the oil outlet and allow the engine oil to completely drain. After the oil has drained, secure the stopper plug to the oil outlet.

Replace the oil filter with a new one. Use an oil filter wrench to unthread the oil filter from the engine. Use a rag to clean the area around the engine of any spilled oil.

Replace the oil filter and add a little oil to the seal of the new oil filter to help with the install. Use your hand to thread the new oil filter onto the engine. Do not overtighten. Use your oil filter wrench to snug the fit but do not overtighten.

Add new oil to your Cub Cadet Ultima. Use the oil recommended by the engine manufacturer and fill to the recommended levels. Replace the dip stick and check the engine oil levels.

Check the oil level with the dip stick. Depending on where it reads, you may need to add more oil. When checking the oil with the dip stick, place the dip stick into the oil and push it all the way down. Remove the dip stick, clean it with your rag, and place it in the oil one more time to check the oil level.

Reconnect the spark plug wire on your Cub Cadet Ultima.

Use our illustrated parts diagrams to locate any replacement parts you may need for maintenance on your Cub Cadet Ultima.

Free Parts Search      Free Shipping

Convert Your Cub Cadet Tractor To a Snow Blower

Convert Your Cub Cadet Tractor To a Snow Blower

We know many of you dread clearing snow during the winter. We also know that maneuvering your shovel or snow blower through heavy, wet snow can be exhausting. If you own a Cub Cadet tractor, you have an alternative way to remove snow this year.  You can convert your tractor into a snow blower, avoiding the need to shovel or purchase a snow blower. Our experts explain what you need to convert your Cub Cadet tractor into a snow blower this winter.

Attachments and accessories vary by model. Different attachment and accessory models are compatible with different snow blower models. Refer to your owner’s manual or contact us for information on attachment and accessory compatibility.

Snow blower attachment

To convert your Cub Cadet tractor into a snow blower, you need a snow blower attachment to remove the snow from your drive and walkways. These attachments have the capacity to handle big snow removal jobs and work well in all snow conditions.

With this attachment, all you need to do is start up your tractor, get on, and let it do all the heavy lifting.

Plow blade attachment

If you prefer to push snow instead of throw it, there is an assortment of Cub Cadet tractor mounted plows to help clear snow from your driveway. Plow blades get closer to the pavement than blowers, leaving you with little to no snow on your pathways.

Tire chains

When using your Cub Cadet tractor in the snow, your tractor tires may not have the stability and traction needed to remove snow. When the pavement is covered by snow or is icy, you can increase the traction by using tractor tire chains.

Tire chains are also beneficial when working on steep terrain and narrow roads. To maintain traction, make sure you have tire chains on your tires. They will make your snow removal tasks safer and more productive.

Wheel weights

Similar to tire chains, wheel weights provide extra traction when working on snowy or icy terrain. Weight wheels are also recommended when adding attachments to the front of your Cub Cadet tractor. Apply these wheels to the rear tires to help weigh down the back end of your machine and press down so the tires grip better.

For even better traction you can apply both tire chains and wheel weights to your mower.

Cast-iron weights

Cast-iron weights are a great accessory when it comes to adding attachments to the front end of your tractor. These weights counterbalance heavy attachments and provide better traction and stability.

Some tractors have built-in front and/or rear weight brackets to hang the cast-iron weights on. Other tractors require a weight bracket. Refer to your owner’s manual to determine what your tractor has and/or needs.

 Snow cab

In addition to snow, winter brings freezing temps and harsh winds so add a snow cab to your Cub Cadet tractor for extra protection from these elements.

It’s important to know your options when it comes to snow removal. Consider converting your tractor into a snow blower this year because it’s a great alternative to shoveling and snow blowing. With these attachments and accessories you can work comfortably and efficiently, while remaining protected from the frigid cold.

Free Parts Search      Free Shipping

How to Clean a Cub Cadet Snow Blower Chute

How to Clean a Cub Cadet Snow Blower Chute

When winter’s worst conditions appear, for most of us, our Cub Cadet snow blowers are our best defense. Snow blowers are meant to make your life easier, but a clogged chute will make the job more difficult. Your Cub Cadet snow blower will become clogged when ice or sticky snow build up around your machine’s auger or the top of your chute where the snow is discharged. This build up in your snow blower prevents snow from exiting your machine as it normally would. Here’s what to do when your Cub Cadet snow blower chute is clogged.

Before performing any maintenance on your Cub Cadet blower, refer to your owner’s manual for maintenance instructions and safety information. Maintenance instructions vary by model, so depending on your snow blower model our instructions may vary slightly.

Never use your hands to clear a clogged chute assembly.  Shut off the engine and remain behind the machine until all moving parts have stopped before working to unclog.

To clean a clogged snow blower chute, release the Auger Control and the Drive Control. Stop the engine by removing the ignition key.

Many Cub Cadet two-stage snow blowers are designed with a convenient chute clean-out tool that is fastened to the front of the auger housing with a mounting clip. Some snow blowers are designed with the clean-out tool at the back of the machine.

If snow and ice get lodged in the chute assemble during operation, use the clean-out tool to safely clean the chute assembly and chute opening.

Refasten the clean-out tool to the mounting clip and reinsert the ignition key and start the snow blower.

While standing behind your Cub Cadet blower, engage the Auger Control for a few seconds to clear any remaining snow and ice from the chute assembly.

How to prevent snow blower clogs

A good method to prevent snow blower clogs is the use of a nonstick snow blower spray. This will help keep the surfaces inside your machine slippery, making it difficult for the snow and ice to build up and attach itself to your snow blower. Spray the chute and auger before use to shield the metal so snow passes through without sticking or clogging.

Free Parts Search      Free Shipping

Fall Lawn Care Tips

Fall is here, though some of us are still experiencing periods of warm temperatures. While we still have some warm weather left, this is the perfect time to prepare your yard for fall and winter.

Keep the grass tall

Tall grass helps keep moisture during warmer temperatures. Mowing high also decreases turf damage from mowing too short, the grass is more drought tolerant, and more weed and grub tolerant.

Trim and edge

Hedge trimmers and pruners are great lawn care tools. Fall is the perfect time to handle overgrown bushes and shrubs and these tools do just that. Note that cutting old and thick branches promotes the growth of new stems.

Edgers, string trimmers, or brushcutters are also great tools. They enhance the look of your yard and add new definition to the area. They can help stop the entrance of plant roots in your sidewalk and driveway. Once winter is over, it will be easier to reestablish a beautiful lawn.

Fertilize

While there are a variety of blended fertilizers in stores, fertilizing starts with you and your mower. Mow your lawn as you normally would and leave the finely chopped grass clippings on your lawn as mulch. Mulching allows the grass to naturally decompose while allowing nutrients to reach your soil and improve the health of your lawn.

Overseed when needed

Soon your lawn will be covered in leaves, and shortly after covered in snow once winter hits. You don’t want bald spots on your lawn when fall ends so it’s a good idea to overseed now.

If you are overseeding, do not mow high. Instead cut the grass at your mower’s lowest height and bag the mower clippings instead of using them as mulch. This way, the seeds will get maximum contact with the soil and new grass will grow.

Dethatch the lawn

The thatch layer is the layer of dead grass, roots, and debris that accumulate on the surface of the soil. Over time, a thick mat forms and this prevents air and water from reaching the soil. Therefore, your lawn is more susceptible to diseases and pests.

If the thatch layer is over a half inch thick, it should be removed. Most lawns need dethatching once a year. To check if it’s time, work your fingers into the grass and take note of the thatch layer. To remove thatch from your lawn, use a dethatching rake or power dethatcher.

Aerate compacted soil

Lastly, consider aeration. Aerating entails punching holes into the lawn to allow oxygen, water, and nutrients to reach the soil. The goal of aeration is to loosen compacted soil and is needed for lawns that suffer from heavy foot traffic and construction.

Free Parts Search      Free Shipping

Fuel Recommendations for your Cub Cadet Snow Blower

Fuel Recommendations for your Cub Cadet Snow Blower

The fuel system in your Cub Cadet snow blower is designed for years of use. However, if you are not mindful of the fuel in your machine and allow it to go bad this can cause starting or running problems and damage to the fuel system. Here’s how to avoid most fuel-related problems in your snow blower.

1 – Do not use gasoline containing more than 10% ethanol.

Gasoline containing higher levels of ethanol is corrosive and attracts water, which can cause starting or running problems and damage to your snow blower’s fuel system. Engines produced for use in outdoor power equipment are not designed for gasoline with more than 10% ethanol.

Read your owner’s manual for information on the proper fuel to use in your snow blower.

2 – Remove fuel from your snow blower for summer storage.

When you’re finished using your snow blower for the season, drain the fuel out of your machine. There may still be fuel in the fuel line and carburetor so start your blower and allow it to run until no fuel is left in the machine.

Make sure there is no old fuel resting in your snow blower. Old fuel left in your snow blower during the off-season will deteriorate and cause problems for your machine. Your blower may not start or run properly and, in some cases, there will be damage to the fuel system.

3 – If you use your snow blower infrequently during the winter, add a fuel stabilizer to your fuel storage container.

Untreated gas left in your snow blower can deteriorate quickly, causing problems for your machine and the fuel system. By ensuring that the fuel in your snow blower is stabilized, you can minimize the chances of deterioration and damage.

4 – Store fuel properly.

Store your fuel in a clean, plastic, sealed container approved for fuel storage. This will help prevent rust and metallic contaminants from entering the fuel system. Close the vent, if equipped, when not in use and store the container away from direct sunlight. Fuel will deteriorate faster when exposed to air and sunlight.

If it takes longer than 30 days to use the fuel in the container, add a fuel stabilizer when you fill the container.

Free Parts Search - 4 Ways to Dispose of Leaves     Free Shipping - 4 Ways to Dispose of Leaves

How to Clean a Lawn Mower Deck

How to Clean a Lawn Mower Deck

Keeping the underside of your Cub Cadet lawn mower clean plays a huge role in the performance of the machine. Grass clippings and other debris cling to the underside of the lawn mower each time you mow, affecting airflow under the deck. Clean your mower deck soon after you’re done mowing. Don’t wait until grass clippings dry and become difficult to remove. Here’s how to clean a  lawn mower deck.

Before performing any maintenance on your Cub Cadet lawn mower, refer to your owner’s manual for maintenance instructions and safety information. Maintenance instructions vary by model, so depending on your lawn mower model our instructions may vary slightly.

Some Cub Cadet mowers have washout ports that make cleaning the bottom of the deck easy. If your mower has a washout port, park the machine on a flat, paved surface and lower the cutting height to the cutting setting. Remove the bag and attach a garden hose to the washout port.

Turn the hose on, start the lawn mower engine and stand behind the machine while you engage the mower blades. Run the mower until no more clippings come out from under the lawn mower deck. When the deck is completely clean, stop the lawn mower engine, shut off the garden hose, and disconnect it from the washout port.

Start the engine again, and stand behind the mower while engaging the mower blades.  Engage the blades for a few minutes to dry off the underside of the mower.

If your mower does not have a washout port, you can still clean the mower deck. Park the machine on a flat surface, shut off the engine, and lower the cutting height. Use your garden hose and aim it in front of the right rear wheel, right in the pavement.

Wait a few seconds then top the hose and engage the mower blades. Run the machine until no more clippings disperse from underneath the mower. Once you’re completely done with the garden hose, run the mower again for a few minutes to dry the underside of the deck.

You can also clean the lawn mower deck by scraping the underside. To scrape the underside of your mower, use a scraper or putty knife.

Make sure the engine is off and all moving parts have stopped before you begin scraping the deck. When you tip the mower on its side to access the underside of the deck, make sure the air filter side is up. This will prevent oil from flowing into the air filter and carburetor, which will prevent your mower from running.

Note: never use a pressure washer to clean your lawn mower deck. The pressure washer can force water into important areas of the mower that should not get wet.

Free Parts Search - 4 Ways to Dispose of Leaves     Free Shipping - 4 Ways to Dispose of Leaves

Cub Cadet Ultima Series

Cub Cadet Ultima Series

Cub Cadet Ultima Series Zero Turn Riders are built with a two by two frame for structural strength typically found on a lot of commercial mowers, and the unique style really stands out.

Some nice features on the Cub Cadet Ultima Series are larger front and rear tires, large grips for comfort, and, instead of foam, a nice, heavy padded grip on the lap bar for a real positive feel. The lap bars are adjustable and will easily adjust for operator comfort. The padded comfort seats also maximize comfort.

The control panel makes it very easy to view your keypad, hour meter, PTO and control system. For your height of cut adjustment, the Cub Cadet Ultima Series did a nice job for your mower deck lift. Instead of a hand lift there is a foot pedal with a simple knob. The presets are easy to view for what height you want. Adjustments are made in quarter inch increments.

There are two mower series in the Cub Cadet Ultima Series. The ZT1 series mowers are powered by EZT 2200 series engines. The ZT1 uses primarily Kohler engines but there is one model with a Kawasaki engine. The ZT2 is the other series and these mowers are on the same chassis, but Cub Cadet upgraded the transmission to a EZT 2800 series. ZT2 mowers have larger front and rear tires for less turfing and better flotation. The EZT  2800s will give you a longer life. You also pick up about a half mile an hour speed, so you go from 7 mph to 7.5 mph. Armrests also come standard on ZT2 mower models.

On both the Cub Cadet ZT1 and ZT2 LED headlights and rear tow hitches some standard. The Kawasaki FR691V Series engine comes standard on all ZT2 series mowers as well as the ZT1 50-inch mower.  The FR691V delivers 23 horsepower, which is a nice upgrade over some of the base engines available in this size mower.

The ZT1 series mowers are available with a 42, 46, 50 and 54 inch cutting width while the ZT2 mowers are available with a 46, 50, 54, and 60 inch cutting width.

Free Parts Search - 4 Ways to Dispose of Leaves     Free Shipping - 4 Ways to Dispose of Leaves

How to Change the Spark Plug on Your Cub Cadet Lawn Tractor

How to Change the Spark Plug on Your Cub Cadet Lawn Tractor

The spark plug on your Cub Cadet equipment should be replaced at least once a year of after 100 hours of use. Spark plugs provide an ignition source for your machine’s engine to power your Cub Cadet lawn tractor. When they go bad, mowing your lawn becomes a challenge. Change the spark plug on your Cub Cadet lawn tractor regularly to keep your mower up and running throughout the whole season.

Before performing any maintenance on your Cub Cadet lawn tractor, refer to your owner’s manual for maintenance instructions and safety information. Maintenance instructions vary by model, so depending on your lawn mower model our instructions may vary slightly.

Before working on your Cub Cadet mower, follow these safety precautions:

  • Shut off the engine
  • Allow the engine to become cool to the touch
  • Disconnect the spark plug wire to prevent accidental starting
  • To carry out this task, you’ll need these tools:
  • 5/8 deep well socket
  • Wrench
  • Extension

To change the spark plug on your Cub Cadet lawn tractor:

  • Locate the spark plug on the side of the engine.
  • Use your socket to loosen the spark plug. Loosen it and grab the spark plug on the end, and give it a couple more turns.
  • Install the new spark plug.
  • Replace the old spark plug with a manufacturer approved replacement part (refer to your Cub Cadet owner’s manual).
  • Hold the spark plug on the end and stick it into the proper hole on the tractor.
  • Turn the spark plug to the left to make sure that it is starting to thread in properly, but turn it to the right to tighten it.
  • Tighten the spark plug by hand. By doing this, you can tell if the threads are going in correctly and won’t strip the threads out of the head of the engine. Tighten as much as you can and then put your socket back on the spark plug to tighten it all the way down. Give it an extra snug turn.
  • If you are working with a twin-cylinder engine, repeat the same steps to change the spark plug on the other side of the machine. Once the spark plugs have been changed, reconnect the spark plug wire.

Free Parts Search - 4 Ways to Dispose of Leaves     Free Shipping - 4 Ways to Dispose of Leaves